Its short notice, but finally here! The third and final race of our triple series will be taking place at Drift Zone in Sports City within the VIP Parking Area of the Dubai International Cricket Stadium.
This is the official 3nd and final race of the triple series we originally announced to welcome 2020 (see original post)
RC-ME.com will host a raffle among all drivers that fully participate in 2 out of 3 race dates with the opportunity to win 1 of the total 3 Xpress Execute XM1S car kits (Mini touring car kit). The winners will be drawn after the 3rd and final RC race award ceremony.
Race Dates are as follows:
- Race 1 – 22nd of January – Mushrif Park – click here for race report
- Race 2- 02nd of April – Ibn Battuta Mall – click here for race report
- Race 3 – 07th of May – Drift Zone
Races will be across the Tamiya M-Chassis, and 1/10- Electric Touring Cars (13.5T Blinky). Please make sure to read the RC race class information below, and all specific information to Race Day facilities and how the race works can be found here.
Click here to sign up to race on RC-Me.com
Race Class Information
1/10 Electric Touring Car Class
- About: 1/10 scale 4WD Touring Cars
- Recommended Skill Level: Advanced to Expert
- General Rules:
- Any 4wd 1/10 electric touring car specified chassis
- 13.5T Brushless Motor
- No BOOST ESC (Electronic Speed Control): ESC must not use software timing (Blinky-Mode). Minimum weight: 1320 gr
- Body: 190mm – 4 door touring car body
- Tires: Rubber tires
- Traction compound is permitted.
- Tire warmers are not permitted.
Tamiya M-Chassis Class
- About: Tamiya M-Chassis FWD and RWD machines.
- Recommended Skill Level: Intermediate to Advanced
- General Rules:
- Chassis: M-07, M-08. Older platforms may be used, but will be at a gear ratio disadvantage
- Spec Motor Rules: Participants in this class fixed timing motor, not lower than 16T.
- No BOOST ESC (Electronic Speed Control): ESC must not use software timing (Blinky-Mode).
- Minimum weight: All M-chassis cars must meet a minimum weight of 1300 grams.
- Gearing: To create an equal speed between all M-Chassis models the max pinion size is 20T (included in box with the m07R).
- General Rules applying to all Tamiya class races
Make sure to read race class-specific rules for any restrictions/exceptions from the general rules.
- All chassis platforms must be built per the instruction manual. Altering their basic structure and design is prohibited.
- Any Hop-Up Option and spare part is allowed and legal as long as it is used in the way it was designed, and installed on the vehicle it was designed for.
- It is strictly forbidden to re-engineer or modify stock or Hop-Up-Options parts.
- Chassis lightening (through milling parts) is prohibited in all TCS classes.
- Lightweight screws and adjustable turnbuckles that are made of aluminum, steel or Titanium made by other manufactures is permitted.
- The use of shims to remove the slop or play in suspension arms, steering bell-cranks, and wheel axles is permitted in all vehicles.
- Changing the camber-link positions on the car other than the way it was intended per the instruction manual or “chassis setting sheet” is prohibited.
- Camber links must be positioned in the existing bulkhead mounting holes. Drilling new camber link holes is prohibited.
- Steering tie-rod linkages, on all chassis platforms, must be attached to the steering knuckle per the instruction manual. Drilling new holes to change “Ackerman” is not permitted. Raising and lowering the steering tie-rods with shims, on the steering knuckle itself to change bump steer is not allowed unless specified in the chassis manual, set-up sheet, or Hop-Up-Option instruction.
- You may alter the car in any way called out in the “car instruction manual” or “chassis setting sheet”. If the “chassis setting sheet” calls out the adjustment, then it’s legal to make the change to your car.
- Any manufactured ball bearing may be used as a Hop-Up.
- Internal Drive Gears: You must use the internal drive gears called out in the chassis assembly manual. The internal drive gears of ANY chassis platform may not be altered, changed or modified unless it is done with Tamiya Hop-Up Options designed for that specific purpose. Using different Pulley, Ring, and Pinion gears from different chassis platforms to create a hybrid internal drive ratio is not allowed. Furthermore, you are not allowed to file, machine or Dremel the gear driveline to squeeze in bigger pinion and spur gears.
- The use of electronic driving aids is strictly prohibited. Examples: Gyroscopes connected to steering servos to control steering input and traction control devices connected to Electronic Speed Controls are NOT permitted.
- Electronics must be mounted in the general chassis locations outlined in the instruction manual of your car, especially STEERING SERVOS. You may move around receivers and ESC’s in alternate positions if the room in your car permits on the MAIN chassis deck only. In cases where a “Shorty” battery pack is being used, where chassis space is freed up, the ESC or Receiver may be repositioned.
- Any Lithium-Polymer (Li-Po) 2s battery may be used, charged up to max 8,4V
- Sport Ni-Cd and Ni-Mh batteries are legal.
- Any battery connector is allowed to be used in all classes.
Car body rules
- All car bodies must be painted and must be cut along the moulded trim lines.
- Removing material beyond/above the trim line is prohibited.
- Leaving extra material below the trim lines of the body is also prohibited.
- You are not allowed to create extra vent holes for the purpose of ventilation or performance enhancement.
- All car bodies must use the wings that are supplied in the.
- Mixing and matching the included ABS plastic wings, between different body styles, is prohibited.
- Any motor connector or direct hard wiring to the motor is allowed.
- The use of any manufacturer’s cooling fan is legal. However, the fan must be no larger than 1.5 in. X 1.5 in. or 40mm square and must run off the receiver or direct from the main battery pack. It is ILLEGAL to have a secondary battery to power the fan. No more than 2 fans total are permitted in a vehicle. This includes the speed control fan.
- It is forbidden to crank the physical timing mechanically or through the use of rare earth magnets. This rule applies to all the classes that use the Tamiya 540-J/Mabuchi or Torque-Tuned silver can motor.
- It is FORBIDDEN to “COOK” brushless motor rotors to weaken magnet strength.
- All Silver-CAN Johnson 540-J, RS-540 Torque-Tuned motors are limited to 23,500 RPM maximum RPM.
- Brushless motor classes may not have less than 16T (stock timing/ not adjustable)
Tire & Wheel rules
- Traction compound is allowed
- Tire warmers are allowed